The REEFE RMP Range of Pressure Switches is a high quality, reliable pressure with for controlling water pressure booster sets in conjunction with an expansion vessel. The pressure switch has an adjustable cut out and differential (cut in) pressure to suit your application. The switch will work with fresh water and sea water and there is a 1/4″ female BSP connection, with electrical connection via screw terminals. These 2 pole N/C (normally closed) pressure switches, are suitable for single phase pumps up to 1.5 kW or as a digital signal to control 3 phase pumps using a control panel. The RMP-CONTROL Control Switch is ideal for dedicated control panel applications with N/C (Normally Closed) and N/O (Normally Open) contacts. These switches are an ideal replacement for Square D and XMP Pressure Switches.
| CODE | 34910 | MODEL | RMP-CONTROL |
| FACTORY SETTINGS CUT IN | 5.0 bar | 72 PSI | FACTORY SETTINGS CUT OUT | 8.0 bar | 116 PSI |
| EQUIVALENT MODELS | N/A | CONNECTION | 1/4″ Female-Rotating Nut |
| CUT IN PRES SCALE | Yes | MAX VOLTS | 250VAC 50Hz |
| AMP | 5 Amp Control Only | PRESSURE SETTING | 2.5 – 12.0 |
| PRESSURE DIFFERENTIAL (MIN | MAX) | 0.8 | 3.8 | MAX OPERATION PRESSURE | 1600kPa (16 Bar) |
Stainless Steel Connection
Oversize Contacts (excluding RMP – FSG)
Rotating 1/4″ Female BSP Connection for Easy Installation*
Ambient Temperature 0°C – 55°C
Fluid Temperature 5°C – 55°C
20 Bar Burst Pressure
Ingress Protection
• IP44 on RMP – FSG
• IP44 on other models
Stainless Steel Connection
Size 104 x 60 x 100mm
Pressure Pumps
Booster Pumps
Control Panels
