Specifications
CODE | 31704 | MODEL | DPR32E.3PS |
CONNECTION | 15A 3 Pin Socket | MAX AMPS | 16 |
MAX kW | 2.2 | CUT IN PRESSURE | 0.5 bar – 5.0 bar |
MAXIMUM FLOW | 200 L/min | INLET | OUTLET | 32mm |
DPR is a compact device for automatic control and protection of electronic pumps up to 2,2 kW (3 HP). Equipped with an innovative outlet pressure reducing/regulating system. It also includes a digital display with instantaneous indication of current consumption and outlet pressure. In addition to the typical characteristics of traditional electronic pump controllers: integrated non-return valve, accumulation diaphragm, pressure gauge, dry-running protection, automatic reset, it allows the user to adjust and stabilize the outlet pressure, avoiding overloads, water hammer and, ultimately, improving end user comfort.
CODE | 31704 | MODEL | DPR32E.3PS |
CONNECTION | 15A 3 Pin Socket | MAX AMPS | 16 |
MAX kW | 2.2 | CUT IN PRESSURE | 0.5 bar – 5.0 bar |
MAXIMUM FLOW | 200 L/min | INLET | OUTLET | 32mm |
Manual regulation of the constant outlet pressure with integrated adjusting tool
Outlet pressure indicator with pointer
Digital adjustment of the starting pressure
Digital pressure gauge (bar or psi)
Inner pressure transmitter and flow sensor
Inner current sensor with instantaneous digital reading
ART function (Automatic Reset Test). If the device has been stopped due to the action of the safety system against dry operation, the ART tries to restart the pump, with a programmed sequence for when water supply has been restored
APR function (Anti-blocking Periodic Routine)
Flooding protection system
Stand-by mode
Anti function, after 3 days of inactivity, the device starts the pump for 10 seconds in order to avoid rotor-locking
Register of operation data: controller operating hours, pump operating hours, number of operating cycles, number of connections to the power supply
Alarm counters
Ingress Protection IP65
Constant Regulated Pressure Supply for Homes
Automatic Operation of pressure Pumps
Constant Regulated Pressure for Irrigation Systems
Rain to Mains Systems
Where high cut-in pressure is required. Up to 5.0 bar start pressure.