Call Us Now!

1500mm, 125mm nozzle, Bottom Entry Acrylic Waterwall

1500mm, 125mm nozzle, Bottom Entry Acrylic Waterwall

Instruction
Manual

Exploded
View

These pressurised waterfall units are available in the following standard sizes. The 125mm nozzle versions are designed to fit in the mortarline of bricks or blockwork. Always test unit before completely bricking in to ensure it is level and water is falling correctly. The projection maybe adjusted with flow supplied, approx. figures are given below. Note: Customised specifications are NOT available on acrylic waterfalls.

Specifications

CODE 19615 SIZE 1500mm, 125mm nozzle
INLET POSITION Bottom INLET SIZE 2 x 32mm FBSP
MIN. FLOW AT INLET (L/HR) FOR SHEER DESCENT EFFECT 6750 MIN. FLOW AT INLET (L/HR) FOR PROJECTING EFFECT 13500

Features & Benefits

Construction

Ensure front outlet is perfectly level. The recommended installation height is 800 to 1000mm from the water surface. Seal around the outlet to prevent possibilty of any leakage back into the wall.
Fit valves to each inlet and ensure tubing length is identical to all inlets.
Install your pump. Ensure its correctly sixed!
Pump prefilter on in-line strainer must be installed to prevent leaf particles etc. from entering the waterfall.
A steel lintel must be installed for any wall or load-bearing structure built above the waterfall.

Applications

Having difficulty finding the right product?


Call our friendly team on 1800 807 604 for assistance

or

Scroll to Top